Range Rover Classic 300TDi Easy Fit Overland Wading Kit Black

Triple 4 Engineering Easy Fit Overland Wading Kit (black hose) to fit all Range Rover Classic 300Tdi models. This is our easy fit kit, which is the same as our standard Overland Kits, but our easy fit kits, as the name suggests, make fitting the wading kit easier. Easy fit kits allow you to retain the standard gearbox and transfer box.

Adaptors to extend them from under the bonnet and up to the Triple 4 manifold. Rather than fitting the gearbox and transfer box swivel unions from our standard Overland Kits, which can be a bit fiddly to fit. We use the very best of everything in our wading kits, no cheap plastic unions and no rock hard inflexible plastic hose.

Triple 4 Engineering Wading Kits are the best available. Our Overland Wading Kits use 6mm breather hose.

This is the finest quality nylon hose on the market. Ultra flexible with superior abrasion resistance. The axle swivel unions in this kit are nickel plated brass, which are strong and take the odd knock which is inevitable when off road.

The internal hose locking mechanism in the unions are brass and stainless steel, allowing for easy disconnecting and reconnecting for maintenance. (cheaper unions use steel internals which obviously rusts and won't release the hose when the time comes). The unions we use in our kits are swivel unions, allowing you to position the outlet of the breather hose just where you want it. Unlike cheaper kits with fixed unions, where the outlet ends up where the union happens to tighten up.

Our 300Tdi kits also include our 5mm power coated alloy Timing Cover Breather Plate complete with swivel union, gasket and stainless steel fixings. The "Y" connectors used in our Overland Kits are made from a superior grade technopolymer shell, again with brass and stainless steel internals.

The kits comes with everything needed to fit them, i. Cable ties and all fixings, all supplied in generous quantities. In all our years of experience, with many other brands of wading kit, you never seem to be supplied with enough cable ties and fixings to do the job. We also supply you with 2 wading plugs for the timing case and the gearbox bell housing.

We can make the kit how you want it, so if you want orange hose, but say a black timing case breather, or you want to swap the orange snorkel hose for less conspicuous black or vice versa, then just give us a ring or message us when you order. What's in the kit?

14 Metres of our 6mm Ultra Flexible Abrasion Resistant Black Nylon Hose (for the main axle and transmission breather hoses). 3 Metres of our 8mm Ultra Flexible Abrasion Resistant Black Nylon Hose (to run from the manifold and up the side of the snorkel / raised air intake).

5 Metres of our 8mm Ultra Flexible Abrasion Resistant Black Nylon Hose (to run from the Timing Cover Breather to the Manifold). 1x 5 Way Technopolymer Manifold. 1x 6mm 3-Way Technopolymer "Y" Connector (allows you to connect the 2 breathers from the gearbox and transfer box together into one hose to bring it up to the manifold).

1x Triple 4 Engineering 300TDi Alloy Timing Cover Breather Plate (black) with Union, Gasket and Stainless Steel Fixings. 2x Wading Plugs for the bottom of the Timing Case and Gearbox.

2x Triple 4 Premium Quality 90º Elbow Swivel Unions for the Axles. 2x Triple 4 Technopolymer Tube-Tube Adaptors to extend the standard Gearbox and Transfer Box Breathers. Optional extras for this kit include an upgraded aluminium maluform tube for running up the snorkel/ raised air intake instead of our nylon hose and a fuel tank breather. This item is in the category "Vehicle Parts & Accessories\Car Tuning & Styling\Performance Transmission\Other Performance Transmission". The seller is "triple_4_4wd_engineering" and is located in this country: GB.

This item can be shipped to United Kingdom, Antigua and Barbuda, Austria, Belgium, Bulgaria, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, Bahrain, Canada, Brazil, Japan, New Zealand, Hong Kong, Norway, Indonesia, Malaysia, Mexico, Singapore, Korea, South, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French Guiana, Iceland, Jersey, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Liechtenstein, Sri Lanka, Macau, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Peru, Paraguay, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Guatemala, Honduras, Jamaica, Kuwait, Panama, Philippines, Qatar, El Salvador, Trinidad and Tobago, Uruguay, Vietnam.

Modified Item: Yes
Manufacturer Part Number: WK424-B
Modification Description: Wading Kit
Brand: Triple 4 Engineering