You are currently on my Suspension Page in the shop categories. 1 x Pair STRAIGHT Rear Trailing Arms Extra Heavy Duty powder coated BLACK.Defender 90/110/130, Discovery 1, RRc, standard suspension No Lift and with standard length shocks. If your suspension is standard height but you have longer travel shocks fitted then we would recommend you fit our. Rear arms, this helps with flex off road as it takes the pressure off the chassis bushes as your wheels drop down.
STRAIGHT Extra Heavy Duty Rear Trailing Arms , they are a heavy duty standard replacement arm STRAIGHT (No Crank) to be used with no suspension lift, some standard arms are getting quite old now and they do tend to brake off on the friction weld on the chassis end, these are probably the strongest rear arms you can get at 12.5KG a pair, using 43mm x 5mm wall tube on the outside and 28mm x 3.5mm wall on the inside, these arms are sand blasted and are double powder coated 1 primer and 2 top coat BLACK. They come complete with the bush in the. Axle end and a new nut on the chassis end. On older RRc you will require a chassis bush as the older ones had imperial threads and the bush has a smaller hole in it, if you are unsure, on the older ones a 24mm spanner fits the nut on the chassis end, ours are metric m20 and a 30mm spanner fits the nut on the chassis end, most of the ones are metric.
Carriage Price for UK mainland only. For the carrier when ordering them, it may.
This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Radius, Swing & Trailing Arms".4x4" and is located in this country: GB. This item can be shipped worldwide.