You are currently on my Suspension Page in the shop categories. 1 x Pair STANDARD HEAVY DUTY Rear Trailing Arms including Nuts & Bolts. Defender 90/110/130, Discovery 1, RRc, standard suspension No Lift and with standard length shocks. These are STANDARD REPLACEMENT arms STRAIGHT (No Crank) and come complete with a Nut & Bolt kit. They are a HEAVY DUTY STANDARD ARM using 28mm x 5mm wall tube, original ones are 28mm x 3.5mm.
Some standard arms are getting quite old now and they do tend to brake off on the friction weld on the chassis end. They come complete with the bush in the. Axle end ready pressed in, also included are full set of Nuts, Bolts and Washers as in the picture. If your suspension is standard height but you have longer travel shocks fitted then we would recommend you fit our Heavy Duty.
Rear arms, this helps with flex off road as it takes the pressure off the chassis bushes as your wheels drop down. On older RRc you will require a chassis bush as the older ones had imperial threads and the bush has a smaller hole in it, if you are unsure, on the older ones a 24mm spanner fits the nut on the chassis end, ours are metric m20 and a 30mm spanner fits the nut on the chassis end, most of the ones are metric. If you would like a Heavy Duty Rear Trailing Arm look for Part Number :- GL1175.
Carriage Price for UK mainland only. For the carrier when ordering them, it may. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Steering & Suspension\Radius, Swing & Trailing Arms".4x4" and is located in this country: GB. This item can be shipped worldwide.