You are currently on my Suspension Page in the shop categories. 1 x Pair STANDARD HEAVY DUTY Rear Trailing Arms including Bushes and Bolts.
Defender 90/110/130, Discovery 1, RRc, standard suspension No Lift and with standard length shocks. These are STANDARD REPLACEMENT arms STRAIGHT (No Crank) and come complete with Bushes and Bolts. They are a HEAVY DUTY STANDARD ARM using 28mm x 5mm wall tube, original ones are 28mm x 3.5mm. Some standard arms are getting quite old now and they do tend to brake off on the friction weld on the chassis end.They come complete with the bush in the. Axle end ready pressed in and all the other bushes and bolts as in the pictures ready to fit straight on. If your suspension is standard height but you have longer travel shocks fitted then we would recommend you fit our Heavy Duty. Rear arms, this helps with flex off road as it takes the pressure off the chassis bushes as your wheels drop down. On older RRc the rear arms where imperial thread, these are metric and will fit older RRc as they come complete with the bushes and bolts, if you are unsure, on the older ones a 24mm spanner fits the nut on the chassis end, ours are metric m20 and a 30mm spanner fits the nut on the chassis end, most of the ones are metric.
If you would like a Heavy Duty Rear Trailing Arm look for Part Number :- GL1175. Carriage Price for UK mainland only. For the carrier when ordering them, it may.The item "Defender Discovery 1 RRc H-Duty Standard Rear Trailing Arms Kit NTC8328 LR049068" is in sale since Tuesday, October 13, 2020. This item is in the category "Vehicle Parts & Accessories\Car Parts\Suspension & Steering\Other Suspension & Steering".4x4" and is located in welshpool, Powys. This item can be shipped worldwide.