20 x CLASSIC WOLFRACE COMPOMOTIVE wheelnuts M16x1.5 x21mm Land Rover Range Rover

Hi and Welcome to another SpeedShackLondon wheelnuts and bolts listing. Thread size - M16 x 1.5 thread. CLASSIC LAND ROVER / CLASSIC RANGE ROVER FITMENT. Sleeve / shank diameter - to fit 21mm diameter wheelnut holes. Outer diameter of the washer - 32mm.

Hexagon / spanner size - 27mm accross flats. Sleeve / shank length measured from the underside of the washer - 16.5mm. Country of manufacture - UK. These will fit the older Classic Wolfrace wheels as made in the 70's and 80's such as Slot Mags and Turbo / Turbovane / Turbovec wheels that require a sleeve type nut with a FLAT seating / washer in this application.

Will also fit many older Classic Compomotive alloy wheels with 21mm wheenut hole diameter, one in particular that they fit is shown in the photos fitted to a Land Rover. Certain Compomotive alloys require a longer sleeve than the 16.5mm long sleeves here, unfortunately we are unable to help if you need a longer sleeve / shank length. THIS SALE IS FOR 20 ZINC PLATED (Silver finish) SLEEVE TYPE WHEEL NUTS WITH FLAT WASHERS IN THE FOLLOWING FITMENTS ONLY. M16x1.5 THREAD WITH 21mm Shank / Sleeve diameter to suit Mainly CLASSIC RANGE ROVER, LAND ROVER AND DERIVATIVES OF THESE VEHICLES. CHECK THE DIAMETER OF THE WHEELNUT HOLES IN YOUR WHEELS ARE 21mm. Measure it carefully on the BACK of the wheel. This figure is CRITICAL to get right or you may order the wrong size and incurr return and re despatch costs. We are a bona fide business established 35 years.

We are based in the West Drayton area near Heathrow / Uxbridge UB7 area.

---